Unsolved
This post is more than 5 years old
2 Posts
0
2535
April 1st, 2004 11:00
Pb with RIS, optiplex and officescan
Hi,
We're using RIS to properly install our Dell Optiplex 170 L with W2K sp3. It works fine until we deploy Trend Micro officescan 5.5. Then, the PC freeze and we must finally reboot. The PC works fine for sometimes 1 or 2 hours, but he finally freezes.
By removing officescan, the problem is solved.
We also have PC other than Dell, and we have no problem, unless we use the same w2k image from RIS.
Has someone the same problem?
Thanks for your reply,
PS : English is not my first langage, so be kind.
Grig13
We're using RIS to properly install our Dell Optiplex 170 L with W2K sp3. It works fine until we deploy Trend Micro officescan 5.5. Then, the PC freeze and we must finally reboot. The PC works fine for sometimes 1 or 2 hours, but he finally freezes.
By removing officescan, the problem is solved.
We also have PC other than Dell, and we have no problem, unless we use the same w2k image from RIS.
Has someone the same problem?
Thanks for your reply,
PS : English is not my first langage, so be kind.
Grig13
0 events found
No Events found!
Texruss
3.4K Posts
0
April 1st, 2004 12:00
I don't have the answer, but the TrendMicro support people have been good about answering emails for one of my clients who has a network license:
http://kb.trendmicro.com/solutions/
All the best,
Texruss
grig13
2 Posts
0
April 1st, 2004 13:00
I've already send my problem to Trend micro support, but they did not reply yet.