This post is more than 5 years old
1 Message
0
599
SMI-S on vVNX
Hi,
I have a problem to authenticate with the SMI-S on vVNX. I'm using TestSmiProvider to test the connection, but I always get - 401 Authorization Required. I tried the default credential and unisphere configured accounts, but none of them works. I tried to access "ecomconfig" via web, but it timed out.
Is there a documentation available, how to configure SMI-S on vVNX?
DaveSciuto
106 Posts
0
August 11th, 2015 07:00
Hello, sith555,
Thanks for asking your question in the vVNX community. You'll find the vVNX document that describes how to configure SMI-S here: https://support.emc.com/docu52689_VNXe-Series-SMI-S-Provider-Programmer's-Guide-for-VNXe.pdf
Rainer_EMC
8.6K Posts
0
August 12th, 2015 10:00
The vVNX and the VNXe series use a different technical base for the SMI-S provider than the SMI-S block provider on VNX and Solutions Enabler
TestSMIprovider was written for the SMI-S block provider for the VNX series and wont work on the VNXe based implementation