Unsolved
This post is more than 5 years old
6 Posts
0
1577
January 26th, 2017 07:00
VNX Simulator Replicator V2
Hello,
we have set up a VNX File Simulator with two DM
I was able to create a Datamover interconnect to another System.
The validate on the interconnect returns "OK"
Once i try to set up a Replication to the specific destination the Simulator returns;
Error 13422428162: User is not allowed to perform this operation due to the replicatorV2 license not being enabled.
Licenses are enabled:
[nasadmin@LAB_VNX1 ~]$ nas_license -l
key status value
site_key online 58 2d a1 74
nfs online
cifs online
snapsure online
replicatorV2 online
[nasadmin@LAB_VNX1 ~]$
Am i missing something here?
No Events found!
Rainer_EMC
6 Operator
•
8.6K Posts
0
January 26th, 2017 16:00
on both systems ?
try checking what the GUI says about the licenses
PeteD2
6 Posts
0
January 26th, 2017 23:00
Hi
also GUI says the Licenses are enabled.
The second system is working fine in regards of replications.
PeteD2
6 Posts
0
August 30th, 2018 00:00
Hi Rob,
unfortunately I was not able to get any Replication running between two VNX Simulator.
What worked was Simulator to real machines.
I guess there is something going on which detects the serial or something else and verifies that the machines are identical.
I could not open a SR for Simulator as this is not covered by EMC Support.