Yes, but what interface is your hard drive using, EIDE/PATA, SATA, SCSI? You may need to install a driver during the initializing stage so setup can see the hard drive. Keep an eye on the text on the white section at the bottom of the screen after it starts booting from CD and you should see a prompt to ask you to press [F6] so you can install additional hardware drivers required for the setup process.
If you don't know which interface your hard drive is using, you should check the hardware specifications of the Dell model you are using.
shay123
2 Posts
0
October 12th, 2004 03:00
esquire
2 Intern
•
2.5K Posts
0
October 12th, 2004 03:00
esquire
2 Intern
•
2.5K Posts
0
October 12th, 2004 04:00
Denny Denham
2 Intern
•
18.8K Posts
0
October 12th, 2004 04:00
See if the information here helps.