Below is the Microsoft answer/response to Code 23. This may or may not be the problem. Code 23. The text displayed for this error code differs depending on the Circumstances.

•If this device is a secondary display adapter and the primary display adapter was located, the following text is displayed: This display adapter is functioning correctly. (Code 23)

The problem is with the main display adapter. To view the properties for the main display adapter, click Properties."

 

Solution button:  Properties

 

•If this device is a secondary display adapter and the primary display adapter cannot be located, the following text is displayed:

This display adapter is functioning correctly. (Code 23)

The problem is with the main display adapter. Fix the main display adapter, and then this display adapter will work.

 

Solution button: None

 

•If this device is not a display adapter, the following text is displayed:

The loaders for this device cannot load the required drivers. (Code 23)

To update the device drivers, click Update Driver.

 

Solution button: Update Driver

 

This code means that the device loader delayed the start of a device and then did not inform Windows when it was ready to start the device.

To resolve this error code, verify the settings for the primary display adapter in Display properties. Try removing the primary and secondary display adapters from Device Manager, and then rebooting to allow Windows to re-enumerate these devices. Verify that the drivers are current and installed correctly.

For devices other than display adapters, follow the recommended solution. If that does not work, try removing the device from Device Manager and using the Add New Hardware wizard to redetect the device.

So basically they are stating it's my GPU causing the issue.. When I found this out I cleared out my drivers and up'd to the tweakerizer 92.81 version.. About 2 months ago I reflashed my 7950GT KO to the SC version so maybe that's causing the issue now... Interesting!

 

Thanx bro!

BRY