Unsolved
This post is more than 5 years old
7 Posts
0
5959
March 8th, 2015 12:00
how to change boot-order
Hello,
I created a Windows Defender Offline DVD via., Windows Defender Offline ISO file.
Iam using Windows-8.1-Single-Language_64-bit
When i was trying to change Boot-Sequence (so that i can use my dvd to boot from) via., going to PC-Settings & then re-starting, i got a bit confused and then pressed Esc. (to escape, since i didn't knew what to select)
I HAVE ATTACHED A PIC (sorry for the bad-image quality) WHERE I GOT STUCK.....
AND I HOPE THAT I COULD GET AN ANSWER WHAT STEP SHOULD I HAVE CHOSEN next to proceed.......
No Events found!
Philip_Yip
9 Legend
•
16.1K Posts
1
March 8th, 2015 12:00
The optical drive is likely not supported with UEFI or SecureBoot.
Moreover strangely Windows Defender Offline isn't supported with SecureBoot.
To use it, format a 4-8 GB USB flash drive to FAT32 and then use Windows Defender Offline to create a bootable USB flash drive. Disable SecureBoot.
After the scan, re-enable SecureBoot.