Unsolved
This post is more than 5 years old
6 Posts
0
4040
July 19th, 2008 09:00
Missing Hal.Dll
This Problem Was Cause After the Ntldr is missing. After i have Fix my ntldr This Problem was out.
I have tried many website for the solution.
But While i use my CD it said No Directory Something like that , Or Said Acess Is Denied
Expand G:\I386\Hal.dl_C:\windows\system32\hal.dll
then it cant process
i have tried bootcfg , bootfix.
And now i have 3 Boot on My bootcfg /list
Can I Erase The Other 2 Which I Was Type Wrong Operating System ?
I Got Alot Of Important Thing Inside.. I Hope Can No Need Be Format
Need Help Urgent~~ I Need Pass up My assigment As Soon As Possible
No Events found!
mombodog
2 Intern
•
12.7K Posts
0
July 19th, 2008 15:00
here is the proper command to replace the hal.dll from CD (or any other compressed file), be sure to include spaces.
expand d:\i386\hal.dl_ c:\windows\system32\hal.dll Substitute d: for the drive letter of your CD.
anytime there is a _ at the end of a file extension it means the file is compressed and must be expanded before it is of use.
Once you are into windows desktop you can clean up the boot ini file by doing a Start/Run, then type in msconfig hit ok, then go to the Boot INI tab and click "check all boot paths"
jmg856
6 Posts
0
July 20th, 2008 04:00
i solve my problem with copy the hal.dll from COPY C:\windows\servicepackfiles\hal.dll C:\Windows\system32\hal.dll
.reed-o.
11 Posts
0
October 29th, 2008 20:00
i also tried to do the following " expand d:\i386\hal.dl_ c:\windows\system32\hal.dll" on the recovery console, but i couldnt because it never recognised the harddrive as WINDOWS and then asked me for administrator password etc..instead, it left that place blank
any suggestions?