Safe Mode uses VGA resolution, 640x480. A big application window might be longer than 480 pixels. In Safe Mode the resolution cannot be changed. I have no suggestions for that application. You can cycle through the buttons on the interface using the Tab key, but if you cannot see the buttons it will be difficult to know how many times to hit tab.
Thanks Rollie. I ran the program in Windows using the Tab key to see how many clicks it took to hit the buttons that were hidden in safe mode and was able to run it successfully in safe mode using the Tab key. Thanks again.
thank you rollie for your suggestion of using the tab key to cycle through (?). i had almost same problem. could not see ok, apply, etc. i now use show setting icon on the taskbar. setting are adjusted right there in on right click , no matter what the settings are. thanks, brian
Rollie_R
2 Intern
•
2.2K Posts
0
September 29th, 2004 19:00
WoodsHick,
Thank you for using the Dell Community Forum.
Safe Mode uses VGA resolution, 640x480. A big application window might be longer than 480 pixels. In Safe Mode the resolution cannot be changed. I have no suggestions for that application. You can cycle through the buttons on the interface using the Tab key, but if you cannot see the buttons it will be difficult to know how many times to hit tab.
WoodsHick
45 Posts
0
September 30th, 2004 08:00
BRIANBORU
201 Posts
0
October 11th, 2004 14:00