Problem solved. Solution :

Problem solved. Solution :

1) First it’s required to prepare recovery media and boot with it 

2) Next step is to run command prompt from recovery media.

3) Type next:

     DISKPART

     LIST VOLUME

     SELECT VOLUME=2 (replace “2” with the number that is associated with the “ESP” label – usually it is 99MB)

     ASSIGN LETTER=Z

     EXIT

4) Still in the command prompt it’s required to associate your target Windows partition with ESP (boot files containing volume)

      bcdboot C:\windows /s Z: /f UEFI (replace C: with the volume letter that is named “OS”)

5) Reboot and check if you are succeed.