Hello guys, I'm kind of a noob so I figured this would be the community to ask for help!

I have a couple hundred devices I need to give fresh wyse images to, and was wondering if there were any easier ways.

The end goal is to plug in power, ethernet, turn it on, select the OS from the grub menu, and let it go.

I can't use the WMMS as I don't have a windows server, nor do I want these devices to get any sort of database/domain configuration/networking so they can freshly configure them on other networks and WMMS configurations. It may be that WMMS doesn't do any of that config and would be the smartest way to go about it, but as I don't have windows server I haven't been able to test anything. If that's my best bet let me know and I can probably spin up a windows server.

I tried to use PXE to boot to a bootable version of the USB imaging tool, but was unable to get it to look for the image files over the network. It seems to just look for USBs. Interestingly enough, you can network boot to the initial imaging screen, and have only the RSP and image files on a USB, and it'll detect and install the os.

I also tried to combine the partial .img files into one bootable iso, and use memdisk - no luck - but I think that just loads and runs the os on the ram anyways?

I'm looking into setting up an HTTP boot, but that would require me to update every device to a new bios version and I think that just leads to more things to automate

Again, any advice would be appreciated

Thanks

Pinned Posts

No conversations found!

Wyse & Linux

No option to boot from flash drive

Dell inspiron 5570

Wyse 3040 BIOS Virtualisation setting and performance boost with Linux

Wyse 3040 BIOS Issue. Ignore the topic, this is the most fitting.

Wyse 3040 - Horizon Vmware - Keyboard Issue

Disable Idle Timeout popup

test

Can not upload Citrix_Workspace_App_23.5.0.58.1 on Dell Management Portal

Wyse Thin Client 3040 Copy Paste Issue

Copy and paste issues with Dell OptiPlex and 5070 clients in Citrix

EMMC only reading

UEFI USB boot fail to a WYSE 3040

Dell Wyse 5070 sometimes after restart "no bootable device found"

Reinstall Windows to ThinOS

Wyse 5070, out of box auto-login and default user/password not working

Latest Solutions

No option to boot from flash drive

Wyse Automated Deployment

3010 T50 updates

Wyse 3040 ThinLinux Upgrade Security key failure

Problem updating firmware

Dell Support Resources