Dear All,

I'm facing a problem accessing the iDRAC of M4110 in M1000e chassis through both CLI and GUI. I have an M4110 Blade array with one member with

Def-Gateway: x.x.252.1.

and with 2 eths (0 and 1)

eth0:

IPAddress: x.x.252.92 NetMask: 255.255.255.0
SupportsManagement: no ManagementStatus: disabled

eth1:

IPAddress: NetMask:
IPv6Address: Description:
SupportsManagement: only ManagementStatus: enabled

and

______________________________ Group Information ______________________________
Name: my-storage Group-Ipaddress: x.x.252.93

My iDRAC network is also x.x.252.x with default gw x.x.252.1. All the blades in M1000e chassis have x.x.252.x iDRAC management IPs (same as this storage blade). But I can't access the iDRAC of my storage blade. All other blades are pinging eachother on  x.x.252.x network. while they can't ping the storage blade. All ports on the MXL switch are similarly configured.

eth1 of the member has SupportsManagement: only and ManagementStatus: enabled, but there is no IP assigned to him. Does this eth provide the access? I tried assigning it an IP from x.x.252.x netwrok but it gave me an error that it can't be on the SAN network.

What am I missing here. Please help.

Regards,

Fazal.