Dear All,

Hi, I just get Dell N3024 as a Core Switch and X1026 as Access.

I try to create topology like this :

VLAN 10 : 10.10.10.xxx/24

VLAN 20 : 20.20.20.xxx/24

VLAN 30 : 30.30.30.xxx/24

VLAN 40 : 40.40.40.xxx/24

Just trying using interface vlan each Switch, 

Switch A :

ip routing

interface VLAN 10

ip address 10.10.10.1 /24

Interface VLAN 20

ip address 20.20.20.1 /24

Interface VLAN 30

ip address 30.30.30.1 /24

Interface port 2

switchport mode trunk

Switch B :

ip routing

interface VLAN 10

ip address 10.10.10.2 /24

Interface VLAN 20

ip address 20.20.20.2 /24

Interface VLAN 30

ip address 30.30.30.2 /24

I think my config is far from done and not best practice...

My question is, what should I configure on each DELL N3024, so all VLAN can connected to Internet? (can create assumption for the ip of Sonic Wall port)

Please kindly need your help.

Thanks before.