I have a Dell Optiplex 5090 MT desktop with a default storage of 1TB HDD. I want to install a 512GB M.2 SSD.
The SSD I have is an Apacer AS2280P4 512GB SSD. It is M.2 PCIe Gen 3x4.
I was trying to install Windows 10 Pro but when it comes to the part where I select the drive to install Windows 10 on, the drive does not appear. This made me think the computer doesn't support it. Yet when I look in the BIOS, I can see the Apacer SSD listed in storage drives.
I tested with a SP 128GB M.2 2280 SATA III SSD. The same problem is encountered.
I checked if it has anything to do with security settings. No luck.
1. The SSD I have is an Apacer AS2280P4 512GB SSD. It is M.2 PCIe Gen 3x4.
2. Yet when I look in the BIOS, I can see the Apacer SSD listed in storage drives.
3. I was trying to install Windows 10 Pro but when it comes to the part where I select the drive to install Windows 10 on, the drive does not appear.
4. I tested with a SP 128GB M.2 2280 SATA III SSD. The same problem is encountered.
1. Where do yall find these strange off-brand SSDs ?
2. Good. Step one complete.
3. SSD must be completely blank. Like DiskPart-Cleaned blank. Also, it should be the only drive currently connected.
Also set BIOS as below.
4. Be sure BIOS is set to UEFI/AHCI/SecureBoot. Also, see #3 above.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Thank you! We have received the required details. We will work towards a resolution. In the meantime, you may also receive assistance or suggestions from the community members.
Tesla1856
10 Wizard
•
18049 Posts
•
71828 Points
1344
0
Posted March 1st, 2022 22:00
1. Where do yall find these strange off-brand SSDs ?
2. Good. Step one complete.
3. SSD must be completely blank. Like DiskPart-Cleaned blank. Also, it should be the only drive currently connected.
Also set BIOS as below.
4. Be sure BIOS is set to UEFI/AHCI/SecureBoot. Also, see #3 above.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.