Hi,

i am trying to fix a controller for a MD3200i controller,

however when it boots i get the SodMainComplete message then it goes straight into the shell

Title: Disk Array Controller
Copyright 2008-2013 NetApp, Inc. All Rights Reserved.

Name: RC
Version: 07.84.47.60
Date: 05/28/2013
Time: 13:16:16 CDT
Models: 2660
Manager: devmgr.v1084api04.Manager
==============================================

06/11/20-13:00:58 (tRAID): sodMain Normal sequence finished, elapsed time = 157 seconds
06/11/20-13:00:58 (tRAID): sodMain complete
06/11/20-13:00:57 (ProcessHandlers): WARN: DbmNoFileSystemException: recType: 35 Line 6717 File cmgrControllerMgr.cc
06/11/20-13:00:57 (ProcessHandlers): WARN: DbmNoFileSystemException: recType: 35 Line 5729 File cmgrControllerMgr.cc
06/11/20-13:00:57 (ProcessHandlers): WARN: CCM: backupStorageAvailable() caught IconSendInfeasibleException Error
06/11/20-13:00:57 (ProcessHandlers): NOTE: vdm::CrushTaskCoordinationManager::handleEvent(1) - Exception N4domi27IconSendInfeasibleExceptionE - IconSendInfeasibleException Error
06/11/20-13:00:57 (ProcessHandlers): NOTE: vdm::CrushTaskCoordinationManager::handleEvent(2) - Exception N4domi27IconSendInfeasibleExceptionE - IconSendInfeasibleException Error
06/11/20-13:00:57 (ProcessHandlers): NOTE: SYMbol available
06/11/20-13:00:58 (ProcessHandlers): SOD: sodComplete Notification Complete

Press within 5 seconds: for Service Interface, for baud rate

Shell task 'tShell0' restarted...

if i try login to the i just get this:

Press within 5 seconds: for Service Interface, for baud rate
urrent date: 06/11/20 time: 13:05:19

 

Enter Password to access Service Interface (60 sec timeout):
SPRI Password input timed out

SPRI login failed.
Shell task 'tShell0' restarted...

 

although at the start of the boot up process it shows this:

Current date: 06/11/20 time: 12:58:21

NetApp, Inc. RAID Controller
Copyright 2008-2013, NetApp, Inc. All Rights Reserved.
Copyright 1984-2006 Wind River Systems, Inc.
VxWorks: VxWorks 6.5 Kernel: WIND version 2.10
Model: 2660 Firmware version: 07.806/11/20-12:58:21 (tRAID): SOD Sequence is Normal, 0 on controller A
4.47.60

not sure if the fw has been messed with to make it netApp or if this is standard?

 

regards