Hi team,

I have 2 S4112T-ON units with version 10.5.6.0 with vlt configured and I have detected that I have lost the management of one of the switches.

This is the config:

STJO-LEAF1# show running-configuration vlt
!
vlt-domain 254
backup destination 1.1.1.2
discovery-interface ethernet1/1/15
peer-routing
primary-priority 4000
vlt-mac 00:01:02:03:04:08
!

STJO-LEAF2# show running-configuration vlt
!
vlt-domain 254
backup destination 1.1.1.1
discovery-interface ethernet1/1/15
peer-routing
primary-priority 8192
vlt-mac 00:01:02:03:04:08
!

STJO-LEAF1# show running-configuration interface mgmt1/1/1
!
interface mgmt1/1/1
no shutdown
no ip address dhcp
ip address 1.1.1.1/24
ipv6 address autoconfig
STJO-LEAF1#

STJO-LEAF2# show running-configuration interface mgmt 1/1/1
!
interface mgmt1/1/1
no shutdown
no ip address dhcp
ip address 1.1.1.2/24
ipv6 address autoconfig
STJO-LEAF2#

STJO-LEAF1# show running-configuration interface eth1/1/15
!
interface ethernet1/1/15
description "VLTi to STJO-LEAF2 Eth1/1/15"
no shutdown
no switchport
mtu 9216
flowcontrol receive off
STJO-LEAF1#

STJO-LEAF2# show running-configuration interface eth1/1/15
!
interface ethernet1/1/15
description "VLTi to STJO-LEAF1 Eth1/1/15"
no shutdown
no switchport
mtu 9216
flowcontrol receive off
STJO-LEAF2#

STJO-LEAF1# show running-configuration interface vlan 1000
!
interface vlan1000
virtual-network 11000
description Inband_Mgmt
no shutdown

STJO-LEAF1# show running-configuration interface virtual-network 11000
!
interface virtual-network11000
description Inband_Mgmt
no shutdown
ip address 172.16.100.207/24

STJO-LEAF2# show running-configuration interface vlan 1000
!
interface vlan1000
virtual-network 11000
description Inband_Mgmt
no shutdown

STJO-LEAF2# show running-configuration interface virtual-network 11000
!
interface virtual-network11000
description Inband_Mgmt
no shutdown
ip address 172.16.100.208/24

I can access via SSH to the STJO-LEAF1 switch, but I cannot access the STJO-LEAF2 switch.

What can it be due to?

Thanks & Best Regards,

Juanmi

Publicaciones fijadas

Redes

Últimas Soluciones

como reseteo DELL 5548P

S4112T-ON OS10 10.5.6.0 with VLT // One switch lost management

Cómo restablecer los valores de fábrica

Powerconnect 5448 no permite TFTP

orts que prácticamente no se utilizan en un N2048P

Recursos de soporte de Dell