Hello Experts,

Have a 48 Port S4048T with below vlan's and am new to this device

vlan29 Server 10.21.30.1/23
Port 25-40 Configured for Servers vlan 29

vlan30 VmWare 192.168.16.1/24
Port 1-24 Configured for Vmware vlan 30

I require 10 more ports for the Server vlan 29 which needs to be used from
current 1-24 Port example ( Port 15 - Port 24 converted into vlan29)

May someone please advice if am going into right direction and the below commands will do the job.

--------------------------------
enable
configure terminal
Interface vlan 30
no untagged TenGigabitEthernet 1/15-1/24
Interface vlan 29
untagged TenGigabitEthernet 1/15-1/24
end

Write.....
--------------------------------