Hi

 

We have a DELL S5248F-ON running O/S 10 Enterprise.

I’m new to DELL switches and for some testing I am using a DELL SFP-1G-T to directly connect my laptop to the switch using ethernet.

The switchport configuration is as follows:

interface ethernet1/1/6

 no shutdown

 switchport access vlan 10

 mtu 1500

 flowcontrol receive off

 flowcontrol transmit off

 spanning-tree port type edge

However, I can’t get the port to come up (it’s currently in an up, down state). I can see that the switch is ok with the SFP.

Please can anyone offer any advice?

thanks