Ok, so this kind of error could be fixed if you synchronize the time of the controllers. To do that open the DSM and select Summary tab, then click on the link edit settings, select time settings and synchronize the time. Please, check all these settings (NTP and Data progression).
From that moment on your data progression will work as expected.
Please let me know if you need further support, and I will be happy to assist.
If the problem persist. You can to change to NTP server or check the NTP server. if your NTP does not work for you you can revert to manual and sync the time is you see that is not in sync. You can use an IP address in case your DNS is broken or not in sync. This could help. But that would be a problem outside of the Compellent itself.
DiegoLopez
4 Operator
•
2.7K Messaggi
0
August 4th, 2021 03:00
Hello @Maurizio1,
Good to see you back in the Dell Community!
Ok, so this kind of error could be fixed if you synchronize the time of the controllers. To do that open the DSM and select Summary tab, then click on the link edit settings, select time settings and synchronize the time. Please, check all these settings (NTP and Data progression).
From that moment on your data progression will work as expected.
Please let me know if you need further support, and I will be happy to assist.
If the problem persist. You can to change to NTP server or check the NTP server. if your NTP does not work for you you can revert to manual and sync the time is you see that is not in sync. You can use an IP address in case your DNS is broken or not in sync. This could help. But that would be a problem outside of the Compellent itself.
Regards.