Hello, I think i made a major error and Im not sure how to get myself out of it. my setup is a dell 730XD with 4 18 tb drives and 2 512 ssd drives. My original setup had 2 18 TB in slots 0 and 1 and the 2 512 ssd drives in slots 12 and 13 respectively. I had set up the 2 18 tb in a virtual drive raid 1for data storage and the 2 512 ssd drives in raid 1 for the os install with a backup for protection. Here’s where things went off the rails. I bought 2 more 18 TB drives for additional data storage and put them in slots 3 and 4. I then went into life cycle like I did the first time and tried to set up another virtual raid 1. I planned on having each drive have a backup for protection. But when I made the new virtual raid 1 the other 2 I had made disappeared. I can no longer boot into windows or do anything other than bios and life cycle stuff. All that to say, can I recover from this? Is there a way to soft rebuild the raids as if it never happened or some way to keep my data and just remake the raid? Im completely lost right now and could really use some guidance.