Hey everyone,

I am still having issues with logging into certain targets on the SAN. I have logged a job with EMC but they keep on sending me documentation that I have gone through already. Where
in my config am I going wrong. I am using iscsi-utils, so that would be the sf driver. Hope it explains the issue well enough



STORAGE PROCESSORS

SP A: 203.123.129.136
SP B: 203.123.129.137

SP-PORTS

SP A-0: 203.123.129.138 iqn.1992-04.com.emc:cx.ck200064601253.a0
SP A-1: 203.123.129.139 iqn.1992-04.com.emc:cx.ck200064601253.a1
SP A-2: 203.123.129.140 iqn.1992-04.com.emc:cx.ck200064601253.a2
SP A-3: 203.123.129.141 iqn.1992-04.com.emc:cx.ck200064601253.a3

SP B-0: 203.123.129.142 iqn.1992-04.com.emc:cx.ck200064601253.b0
SP B-1: 203.123.129.143 iqn.1992-04.com.emc:cx.ck200064601253.b1
SP B-2: 203.123.129.144 iqn.1992-04.com.emc:cx.ck200064601253.b2
SP B-3: 203.123.129.145 iqn.1992-04.com.emc:cx.ck200064601253.b3



My ISCSI config file looks like this

HeadDigest=never
DataDigest=never
ComFailTimeout=15
Continious=no
ConnFailTimeout=120
InitialR2T=yes
DiscoveryAddress=203.123.129.138
DiscoveryAddress=203.123.129.142



I need to know how to login in just these targets on the Clariion:


SP A-0: 203.123.129.138 iqn.1992-04.com.emc:cx.ck200064601253.a0
SP B-0: 203.123.129.142 iqn.1992-04.com.emc:cx.ck200064601253.b0


I appreciate all the documentation but I have been through them and not getting anywhere.
If you could point out where I am going wrong that would be awesome

cheers