UNSOLVED
Latitude E7450, Two U2415, Daisy chain problems
Refurbished (received this past Wednesday) Latitude E7450 =
i5 5300
Windows 10
8GB ram
256GB hard drive
Two U2415 monitors, no dock station;
Daisy chain problems
======================================
I thought I set things up correctly. I can not adjust the first external U2415 monitor to DP1.2 'enabled'
When I try (with e7450 connected to first monitor and first monitor connected to second monitor), I get a pop up on the first monitor that I need to click on CONFIRM TO ALLOW THE CHANGE FROM DP 1.2 NOT ABLE TO "DP 1.2 ENABLED".
There is no way my cursor will allow that as the cursor is shadowed on the first monitor, and moves about,
SETUP:
Latitude E7450 rear mDP OUT --> mDP to DP cable -->
#1 U2415 DP IN (DP 1.2 Enabled)
#1 U2415 DP
OUT -- > DP to mDP cable -->
#2 U2415 mDP
IN
(DP 1.2 Disabled)
============================================
Besides doing it again, are there any further (very specific) instructions suggested? I thought I updated all drivers and bios. The E7450 is connected to Dell driver auto update link.
Thanks in advanced!
