Onopgelost
1 Rookie
•
3 Berichten
0
17
November 23rd, 2024 11:23
Windows 11 pro 24h2 ACPI issues
Hallo,
Ik heb een probleem met beide mijn Dell Vostro 5515 laptops.
Ik heb hier Windows pro 11 24h2 op geinstalleerd en met de support assist alle drivers geinstalleerd.
Op het eerste gezicht werkt alles en in het apparaatbeheer staan geen uitroeptekens.
Echter als de laptop in slaapstand gaat voor een tijdje (op netstroom of accu, geeft geen verschil),
Dan krijg ik bij twee apparaten bij het apparaatbeheer een uitroepteken.
- Systeemapparaten / Microsoft ACPI-compatible ingessloten controller. (Dit apparaat start niet (code 10), De aangevraagde bewerking is niet gelukt.))
- USB-connectorbeheerders / UCM-UCSI ACPI-apparaat. (Op dit apparaat wordt gewacht totdat een ander apparaat of andere set apparaten wordt gestart. (Code 51))
De laptop herstarten, of uitschakelen en herstarten haalt niets uit.
De laptop uitzetten, de bios in gaan, save & exit en windows starten lost het op. Echter het komt gewoon weer terug.
De apparaten verwijderen in apparaatbeheer en de laptop direct herstarten lost het ook tijdelijk op. Echter het komt gewoon weer terug.
Hebben meer mensen hier last van en weet iemand hoe het permanent op te lossen?
De laptops lijken verder overigens normaal te functioneren, maar ik wil graag van de uitroeptekens af.
Hello,
I am having a problem with both my Dell Vostro 5515 laptops.
I installed Windows 11 pro 24h2 on this and installed all drivers with the support assist.
At first glance everything works and there are no exclamation marks in the device manager.
However, if the laptop goes into sleep mode for a while (on AC power or battery, makes no difference),
Then I get an exclamation mark in the device manager on two devices.
- System devices / Microsoft ACPI-compatible embedded controller. (This device does not start (code 10), The requested operation was not successful.))
- USB connector managers / UCM-UCSI ACPI device. (This device is waiting for another device or set of devices to start. (Code 51))
Restarting the laptop or switching it off and restarting it does nothing.
Turning off the laptop, entering the bios, save & exit and starting windows solves it. However, it just comes back.
Deleting the devices in device manager and restarting the laptop immediately also solves the problem temporarily. However, it just comes back.
Does anyone else have this problem and does anyone know how to solve it permanently?
The laptops seem to function normally otherwise, but I would like to get rid of the exclamation marks.