Hi folks,

I wanted to configure a backup of sharepoint 2010 with Networker 7.6.2 so I installed the new nmm 2.4

Since I already use nmm 2.3 for backin up exchange 2010 I thought it should not be soo difficult.

I installed networker client 7.6.2 and then nmm 2.4 on one sharepoint frontend server.

I configured the group and the sharepoint frontend server client resource in FQDN format

My first simle setup was to backup 'All' saveset to see how it works, and if the basic setup is ok, I will need file backup and system components anyway in my backup.

The first error I got in this configuration was:

82296:nsrsnap_vss_save:NMM .. Operation unit failed with error 'Please make sure you have configured at least one NetWorker Device and client resources are configured for the application host[XXXXXX01.domain] and the proxy client[xxxxxx01.domain] on NetWorker Server [servername]'.Possible cause: 1)Unsupported file system or 2)write-protected disc or 3)No space on disc or 4)Drive not found

I replaced the servernames, the thing to notice is that the application host is in upper case and the proxy client is lowercase, so since I already configured the client in FQDN format i thought it could be because of the upper or lower case, I was not really sure because I found no real information that this could be an issue, I treid to set the proxy: NSR_DATA_MOVER=XXXXXX01.domain

seemed cool, that error didn't appear, but after the import snapshot stage nothing happened, after some time I got this messages:

77320:libpsvssclnt: Failed to accept incoming connection for rsh command execution: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

77320:libpsvssclnt: Failed to accept incoming connection for rsh command execution: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

29789:libpsvssclnt: rpc_write: setting up stderr: An established connection was aborted by the software in your host machine.

29789:libpsvssclnt: rpc_write: setting up stderr: An established connection was aborted by the software in your host machine.

29789:libpsvssclnt: rpc_write: setting up stderr: An established connection was aborted by the software in your host machine.

29789:libpsvssclnt: rpc_write: setting up stderr: An established connection was aborted by the software in your host machine.

29789:libpsvssclnt: rpc_write: setting up stderr: An established connection was aborted by the software in your host machine.

29789:libpsvssclnt: rpc_write: setting up stderr: An established connection was aborted by the software in your host machine.

48462:nsrsnap_vss_save:PS: (CMTDXlator::ProcessSelectedComponent)  FAILED

48462:nsrsnap_vss_save:PS: (CMTDXlator::ProcessWriterSavesetComponents)  FAILED

48462:nsrsnap_vss_save:PS: (CMTDXlator::ProcessWriterSavesets)  FAILED

48462:nsrsnap_vss_save:PS: (CMTDXlator::PrepareSnapshotObjects)  FAILED

NMM .. Error generating files and directives list for the backup.

64036:nsrsnap_vss_save:NMM .. Error preparing list of files for backup: Error generating files and directives list for the backup.

63372:nsrsnap_vss_save:NMM .. Registration of snapshot set failed -- Error generating files and directives list for the backup

77175:nsrsnap_vss_save:NMM ..  completed commit replica with status of false.

63335:nsrsnap_vss_save:NMM backup failed to complete successfully.

Internal error.

I found some interesting entries in this logfile: C:\Program Files\Legato\nsr\applogs\libpsvssclnt.1348851048..raw

0 1348851139 2 0 0 7616 3868 0 ..libpsvssclnt 2 %s 1 0 46 [BrcConnMgr.cpp 86] Inside BrcConnMgr::init()

0 1348851139 2 0 0 7616 3868 0 ..libpsvssclnt 2 %s 1 0 71 [BrcConnFactory.cpp 202] ConnectionFactory::starting remote worker save

0 1348851139 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 44 [BrcConnFactory.cpp 730] Created IPv6 socket

0 1348851139 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 78 [BrcConnFactory.cpp 1006] Port information requested for fd 2196 returned 9900

0 1348851139 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 63 [BrcConnFactory.cpp 1006] Socket 2196 is listening on port 9900

64463 1348851139 2 0 0 7616 3868 0 .libpsvssclnt 28 Could not release mutex lock 0

0 1348851139 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 78 [BrcConnFactory.cpp 1006] Port information requested for fd 2196 returned 9900

0 1348851139 2 0 0 7616 3868 0  libpsvssclnt 2 %s 1 0 61 [BrcConnFactory.cpp 585] Added socket 2196 bound to port 9900

0 1348851139 2 0 0 7616 3868 0 ..libpsvssclnt 2 %s 1 0 78 [BrcConnFactory.cpp 1006] Port information requested for fd 2196 returned 9900

0 1348851139 2 0 0 7616 3868 0 ..libpsvssclnt 2 %s 1 0 165 [BrcConnFactory.cpp 304] Starting remote exec of command [nsrsnapbwragent -H xxxxxx01.domain -p 09900:09900 -D 0 -l 1348851047] on host XXXXXX01.domain, port 514

0 1348851259 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 95 [BrcConnFactory.cpp 313] remote_exec() failed on try # 1. Trying again after waiting 3 seconds.

0 1348851382 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 95 [BrcConnFactory.cpp 313] remote_exec() failed on try # 2. Trying again after waiting 3 seconds.

56630 1348851505 0 0 2 7616 3868 0 . libpsvssclnt 34 Could not start the remote process 0

0 1348851505 2 0 0 7616 3868 0 . libpsvssclnt 14 LOG [%s %d] %s 3 0 18 BrcConnFactory.cpp 1 3 343 0 34 Could not start the remote process

0 1348851505 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 102 [BrcConnFactory.cpp 193] start_workersave_*() failed on try # 1. Trying again after waiting 3 seconds.

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 71 [BrcConnFactory.cpp 202] ConnectionFactory::starting remote worker save

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 44 [BrcConnFactory.cpp 730] Created IPv6 socket

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 78 [BrcConnFactory.cpp 1006] Port information requested for fd 2200 returned 9905

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 63 [BrcConnFactory.cpp 1006] Socket 2200 is listening on port 9905

64463 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 28 Could not release mutex lock 0

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 78 [BrcConnFactory.cpp 1006] Port information requested for fd 2200 returned 9905

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 61 [BrcConnFactory.cpp 585] Added socket 2200 bound to port 9905

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 78 [BrcConnFactory.cpp 1006] Port information requested for fd 2200 returned 9905

0 1348851508 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 165 [BrcConnFactory.cpp 304] Starting remote exec of command [nsrsnapbwragent -H xxxxxx01.domain -p 09905:09905 -D 0 -l 1348851047] on host XXXXXX01.domain, port 514

0 1348851628 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 95 [BrcConnFactory.cpp 313] remote_exec() failed on try # 1. Trying again after waiting 3 seconds.

0 1348851751 2 0 0 7616 3868 0 . libpsvssclnt 2 %s 1 0 95 [BrcConnFactory.cpp 313] remote_exec() failed on try # 2. Trying again after waiting 3 seconds.

can someone help me to figure out why I get this errors? it seems like 2 components want to connect to each other on localhost but they fail....

greetings

Samuel