Hello everyone,

I have an issue with a Optiplex 380. On start up I have the error of the lights 3 and 4 that are lighted up. Moreover, I have a beeping sound that accompanies it. Following some research I saw that it could be some bad memory placement. I removed the Ram (I have only one in it) replaced it and it worked for some minutes then after restart the issue was still there. I think that my Ram may be damaged. I plan on buying a new one. If it is not the case and that it is the slot that is not working correctly, is there a way to modify the main slot to the second one? In the picture below in red the main slot, in blue secondary.

Thanks a lot for your help