17 Posts

January 7th, 2005 05:00

It may be that the system is picking up the sound on the external mic.   Is there a way to dsiable the external mic only?

496 Posts

January 7th, 2005 18:00

You do know the MIC in is not Stereo but Mono right?, the music you record won't sound very good anyway.

496 Posts

January 8th, 2005 00:00

Yep, i have the same sound card. It's integrated on the chipset, i think all inspiron's have the same.
 
The output is, in fact, stereo. But the mic port is not.
 
Where do you say it says it's stereo?

17 Posts

January 8th, 2005 00:00

Mine says stereo.  Hum are you sure?

17 Posts

January 8th, 2005 02:00

When I ran my stereo recodding deveice into the mic in it recorded a stereo track. At least it looked like it with the L and R meters jumping differently. The selection id inputs in the 'selection" for Cakewak HS also allows left, right and stereo.  When I double click on the "recording" setting for the mixer it gived me a stereo mix option for recording along with mic.  As I have found nothing on the "stereo mix" setting I really have no idea what it does though.

Dale

496 Posts

January 8th, 2005 17:00

Well thats weird. I was quite sure it was mono, i ve read about it a lot of times. Maybe it's your model then that has stereo input.

17 Posts

January 8th, 2005 19:00

It is hard to tell as I can't find any specs on most of the things in the computer.  Like the sound chip.  This part is a bit frustrating.  The only info I have found is at the SigmaTel site, and it is not specific to my system as near as I can tell.  I ordered one of the "Holiday Special" modesl with the Celerion 1.4 an 80 gig drive the 8600 pacakge 2 that was running at the time.

496 Posts

January 8th, 2005 20:00

Yeah well the sound card is the same as mine. It's an integrated chipset, wich means it's on the motherboard, it's not a different card or nothing like the video card

17 Posts

January 10th, 2005 20:00

I knew that part, but I figured there would be some info on it.  SigmaTel says they do not really release due to agreements with the hardware manufacturer.  As such the manufacturer is supposed to have the specs.  But, if they are out there I can't find them!


Dale

No Events found!

Top