Power Options

Question

We recently had a power outage and just expected, the APC UPS shutdown the servers.  To my surprise, the Network Shutdown Utility does not restart the servers and explains that this is controlled by the BIOS on the servers.  Well, I have two 500sc, two 2400s, one 2500 and one 2800.  All BIOSs are up to date and neither of the 500s and 2400s have any Power Options in the BIOS setup.  I looked carefully.  Please tell me I am missing something.  Thanks in advance. Tony

Mark_A_Smith · Answer

You are not missing something.  The older servers do not have power options in the BIOS.

wacoinst · Answer

I need to confirm my 2500 and 2800 do not too.  Is there anything else I can do?  Any jumpers on the motherboard?

PowerEdge Hardware General

Was this post helpful?