thanks,  your right, I found it.

 

Inspiron E1505
Intel Core 2 Duo processor T7200 (4MB/2.00GHz/667MHz)
15.4 Inch UltraSharp TrueLife Wide-screen WSXGA+
1GB, DDR2, 533MHz 2 Dimm
256MB ATI MOBILITY RADEON X1400
120GB 5400RPM SATA Hard Drive
8X DVD+/-RW Philips Drive
Intel PRO/Wireless 3945 802.11a/g Mini Card (54Mbps)
Dell Wireless 355 Bluetooth Module (2.0 + EDR)
Windows XP Media Center Edition 2005
Bios A08
pur. Sept. 7 2006
WRT54G Linksys router v3.1 (DD-WRT v23 SP2 std)
ZoneAlarm Pro v 6.0.667.000

You should be able to print out a configuration information page from with the printer.

Outstanding.

Once I found the mac address I was able to find the ip address which is what I needed to get into the web gui.  I then changed the default host name to something familiar, however when I check my clients in my router I see the mac address, ip address, but the host name is still blank.  Dont suppose you would know why the host name is not appearing?  Could this be because it is wired the router and not just connecting wirelessly?

 

Inspiron E1505
Intel Core 2 Duo processor T7200 (4MB/2.00GHz/667MHz)
15.4 Inch UltraSharp TrueLife Wide-screen WSXGA+
1GB, DDR2, 533MHz 2 Dimm
256MB ATI MOBILITY RADEON X1400
120GB 5400RPM SATA Hard Drive
8X DVD+/-RW Philips Drive
Intel PRO/Wireless 3945 802.11a/g Mini Card (54Mbps)
Dell Wireless 355 Bluetooth Module (2.0 + EDR)
Windows XP Media Center Edition 2005
Bios A08
pur. Sept. 7 2006
WRT54G Linksys router v3.1 (DD-WRT v23 SP2 std)
ZoneAlarm Pro v 6.0.667.000

2610

 

 

Inspiron E1505
Intel Core 2 Duo processor T7200 (4MB/2.00GHz/667MHz)
15.4 Inch UltraSharp TrueLife Wide-screen WSXGA+
1GB, DDR2, 533MHz 2 Dimm
256MB ATI MOBILITY RADEON X1400
120GB 5400RPM SATA Hard Drive
8X DVD+/-RW Philips Drive
Intel PRO/Wireless 3945 802.11a/g Mini Card (54Mbps)
Dell Wireless 355 Bluetooth Module (2.0 + EDR)
Windows XP Media Center Edition 2005
Bios A08
pur. Sept. 7 2006
WRT54G Linksys router v3.1 (DD-WRT v23 SP2 std)
ZoneAlarm Pro v 6.0.667.000

This printer connects wirelessly? 

 

Again, I use a print server and connect thru NetBios name with a fixed IP Address.

I think it may be capable of connecting wirelessly, but I have not tried that, for I have not needed it to.  I have it wired for I need Desktops to print to it.

 

Do you know if you setup a wireless printer without ethernet connection, do you also have to setup encryption if you are on a wireless network with encryption.  This is for another network I was thinking about setting up.  I found a hp printer that said it could do wpa but not wpa2.

 

Inspiron E1505
Intel Core 2 Duo processor T7200 (4MB/2.00GHz/667MHz)
15.4 Inch UltraSharp TrueLife Wide-screen WSXGA+
1GB, DDR2, 533MHz 2 Dimm
256MB ATI MOBILITY RADEON X1400
120GB 5400RPM SATA Hard Drive
8X DVD+/-RW Philips Drive
Intel PRO/Wireless 3945 802.11a/g Mini Card (54Mbps)
Dell Wireless 355 Bluetooth Module (2.0 + EDR)
Windows XP Media Center Edition 2005
Bios A08
pur. Sept. 7 2006
WRT54G Linksys router v3.1 (DD-WRT v23 SP2 std)
ZoneAlarm Pro v 6.0.667.000

Anybody know?

 

 

Inspiron E1505
Intel Core 2 Duo processor T7200 (4MB/2.00GHz/667MHz)
15.4 Inch UltraSharp TrueLife Wide-screen WSXGA+
1GB, DDR2, 533MHz 2 Dimm
256MB ATI MOBILITY RADEON X1400
120GB 5400RPM SATA Hard Drive
8X DVD+/-RW Philips Drive
Intel PRO/Wireless 3945 802.11a/g Mini Card (54Mbps)
Dell Wireless 355 Bluetooth Module (2.0 + EDR)
Windows XP Media Center Edition 2005
Bios A08
pur. Sept. 7 2006
WRT54G Linksys router v3.1 (DD-WRT v23 SP2 std)
ZoneAlarm Pro v 6.0.667.000

Any Encryption setting would be for allowance into the network.  Any objects such as printers that are accessable by "Everyone" can be used.

 

The printer should be hard wired to a switch/router which would be inside the perimeter of any access point.