I believe Stand-by should work with driver 42.57 and 45.91. Also, driver 52.16 might work, but you may need to press FN and F8 after booting your comp from Stand-by. Usually, you'll have to download and test these drivers for yourself to see which works best. It's a trial and error thing. Be sure to uninstall your drivers before installing new ones.
Thanks Shoey. I tried 42.57, 45.91, & 52.16 and was not able to get stand-by to work. 42.57 works fine in my I8200. Please advise if anyone knows which driver will allow standby & nView functions in I8000. Thanks.
Shoey Peachew
201 Posts
0
January 1st, 2004 04:00
Here is Pieter's .inf link with instructions on how to install his modded drivers:
http://homepages.paradise.net.nz/ohau-estate/mobilegpuindex.htm
I believe Stand-by should work with driver 42.57 and 45.91. Also, driver 52.16 might work, but you may need to press FN and F8 after booting your comp from Stand-by. Usually, you'll have to download and test these drivers for yourself to see which works best. It's a trial and error thing. Be sure to uninstall your drivers before installing new ones.
kdpike
11 Posts
0
January 4th, 2004 16:00