3007WFP with ATI X1400 Mobility ?

Question

HI, I have an Inspiron 9400 with an ATI X1400 mobility video card wich have a dual-link DVI-D connector. Will I be able to run the 3007WFP at 2560x1600 with this setting ? Thank you.

DELL-Chris M · Answer

joash,

We have not tested the X1400. These are the Dual-link video cards that Dell has tested on the 3007WFP:

DVI-I ATI Crossfire 1950 XTX
DVI-I ATI Radeon X1900 XTX
DVI-I ATI FireGL V7200
DVI-D NVIDIA GeForce 8800 GTX
DVI-I NVIDIA GeForce 7950 GX2
DVI-I NVIDIA GeForce 7900 GX2
DVI-I NVIDIA GeForce 7900 GTX
DVI-I NVIDIA GeForce 7900 GS
DVI-I NVIDIA GeForce 7800 GTX
DVI-I NVIDIA GeForce 7600 GT
DVI-I NVIDIA Quadro FX 4500
DVI-I NVIDIA Quadro FX 4400
DVI-I NVIDIA Quadro FX 3500
DVI-I NVIDIA Quadro FX 3450

fendley · Answer

Chris,   Will the 3007 WFP work with the GeForece Go 7950 GTX in the M1710?

AEV · Answer

I would like to know the answer to that question also.   If the M1710 can only drive the monitor to 1920x1200 then  I will be happy with that.

_666_ · Answer

In order for your video card to drive it at 1920x1200 it has to be able to drive it at 2560x1600 first...   In other words, you either get 2560x1600 and everything below it (with downscaling done by your video card).   OR   You get 1280x800 and below, again all down-scaling done by your video card.

joash · Answer

For those who are interested, no it is not possible to run the 3007WFP at 2560x1600 with the ATI X1400 Mobility. I've try with many different drivers and the only working resolution is 1280x800...

Monitors

Was this post helpful?