While the recommended (and maximum) distance of the 2407's bottom edge from the bottom of the monitor's stand = 4.75 inches ... Would there be any issues in maintaining the monitor at its lowest monitor-stand position?
I ask, because my computer desk's
shelf-clearance above the desktop is 17.25 inches. Would I be able to mount the monitor on its stand, so that the
2.25 inch-clearance of bottom monitor edge above desk ...
plus 14.5 inch height of the 2407 surface ... will permit me to keep the monitor underneath the 17.25 clearance of the desk's shelves.
While on paper, it would appear that there would be (17.25" - 16.75") half an inch of room to spare, it would help to get assurance of being able to tuck this large monitor under my 17.25 inch shelves.
To play the devil's advocate on my side, I suppose I could angle the monitor for eye-comfort by a couple of degrees (bottom edge closer to me), which would lower the total height of the monitor+stand a teeny-tiny amount.
Thanks ChrisM. I believe I read in a brief bio that you provided that you are currently using a 2407 monitor. Could you measure yours at its lowest position, to determine the minimum height of your untilted (90 degree angle to desk) monitor on stand , and would your 2407 monitor fit underneath desk shelves that have a 17.25 clearance?
I ask to determine if the 2407 monitor on stand will fit underneath desk shelves that have a 17.25 inch clearance.
At the lowest setting with the soundbar removed, the bottom of the monitor 1 1/8 inches from the table. It is 15 1/5 inches from the table to the top of the monitor.
I have a flat panel monitor on my demension 3000 and i am having trouble with the monitor menu and a padlock in the middle of my screen can you tell me hoew to fix this please it is driving me up the wall.
DELL-Chris M
Community Manager
•
56.9K Posts
0
May 29th, 2007 00:00
Non-Adjustable:
1. Width of 2407 surface (and of viewing screen).
22 inches, 20.4 inches
2. Height of 2407 surface (and of viewing screen).
14 1/2 inches, 12 3/4 inches
3. Diagonal distance of 2407 surface (and of viewing screen).
26 1/4 inches, 23 3/4 inches
Adjustable:
4. Minimum distance of 2407's bottom edge from bottom of monitor stand.
2 1/4 inches
5. Recommended distance of 2407's bottom edge from bottom of monitor stand.
4 3/4 inches
6. Maximum distance of 2407's bottom edge from bottom of monitor stand.
4 3/4 inches
SteveRad
11 Posts
0
May 29th, 2007 01:00
DELL-Chris M
Community Manager
•
56.9K Posts
0
May 29th, 2007 16:00
* Nope.
SteveRad
11 Posts
0
May 29th, 2007 17:00
DELL-Chris M
Community Manager
•
56.9K Posts
0
May 30th, 2007 00:00
At the lowest setting with the soundbar removed, the bottom of the monitor 1 1/8 inches from the table. It is 15 1/5 inches from the table to the top of the monitor.
SteveRad
11 Posts
0
May 30th, 2007 01:00
briggsybro
7 Posts
0
May 31st, 2007 01:00