2 Intern

 • 

199 Posts

December 9th, 2007 14:00

They do work.  Tested on mothers laptop, we have the same type of laptop. 
 
If I call tech support and they do a "direct connect" to the laptop will they be able to diagnose that? So I know exactly what part to buy so I can have it installed.
 
Thanks for your help
 
- M

9 Legend

 • 

87.5K Posts

December 9th, 2007 14:00

Not if the system won't boot into Windows, no. Just about any shop can replace a mainboard - before you go to that expense ($400-500), consider whether it's worth that. You might also consider seeking a shop that can do board-level soldering repairs to see if a jack replacement - cost about $150 - will solve the problem, rather than a complete mainboard replacement.

9 Legend

 • 

87.5K Posts

December 9th, 2007 14:00

If the two components you mention test OK, yes, it's the mainboard.

9 Legend

 • 

87.5K Posts

December 9th, 2007 15:00

Outside of having a pro evaluate it with a multimeter/test equipment, there's no easy way to tell. However, if the system will operate except for the battery charger, there's a high probability it's just a damaged power jack, not a faulty mainboard.

2 Intern

 • 

2.4K Posts

December 9th, 2007 15:00

I vote damaged jack as well
 
A new motherboard would go ~$125 on eBay if you'd rather go that route. Sell your old motherboard while you are at it. You'd be surprised how much busted motherboards sell for (esp since only the jack seems to be broken)

2 Intern

 • 

199 Posts

December 9th, 2007 15:00

It does boot up into Windows.  I just have to charge the battery up via my mothers laptop in order to have a fully charged battery.
 
How can you tell if it's just the "jack"?
 
-M

2 Intern

 • 

199 Posts

December 9th, 2007 19:00

If I purchase a new jack...I have no idea what type to get,  would it be easy to install myself or should I have a tech do it.
 
Where would I purchase a "jack" from?

9 Legend

 • 

87.5K Posts

December 9th, 2007 20:00

You can buy the jack for about $30 from several vendors. Installing it requires de-soldering a multilayer PC board, and re-soldering the same - it's not for those without the experience and tools (this isn't a job for a hack with a handheld soldering iron) - a hack job will turn a $150 repair bill into a need for a replacement mainboard.

There are many shady vendors on EBay - I would go the repair route, rather than that one.
No Events found!

Top