I have the same problem on my vostro 1000 and have done for two months +, My screen is very faint upon switch on not all the time, its intermittent and last from a few minutes upto 15 minutes, I have had programms downloaded by dell and even a new lcd and motherboard and the problem is still here, Im not a happy person, as i have to phone again tomorrow to see what we can do now.
while wating for an expert reply, I reset all LCD connections AND reduced brigthness (Fn+down arrow) AND in BIOS I have reduced brightness on powerup.
All this led to much much longer LCD functioning OK periods. I susspect backlight and/or inverter problem after reading other entries. My Notebook is 5 years old. Any experts out there - please comment if I needto replace the backlight or inverter.
Hi Please can you advise as in my last message im having problems with the lcd being faint, I have had a new lcd fitted and a mother board, yet i still have the same problem, Would this be the same problems as the person with the Inspirion?
zoe.evans
2 Posts
0
March 31st, 2008 01:00
geo-inspiron860
4 Posts
0
March 31st, 2008 03:00
while wating for an expert reply, I reset all LCD connections AND reduced brigthness (Fn+down arrow) AND in BIOS I have reduced brightness on powerup.
All this led to much much longer LCD functioning OK periods. I susspect backlight and/or inverter problem after reading other entries. My Notebook is 5 years old. Any experts out there - please comment if I needto replace the backlight or inverter.
ejn63
9 Legend
•
87.5K Posts
0
March 31st, 2008 09:00
You have a dead backlight.
geo-inspiron860
4 Posts
0
March 31st, 2008 11:00
ejn63
9 Legend
•
87.5K Posts
0
March 31st, 2008 12:00
If you are versed in disassembling delicate parts and soldering, you can try replacing the bulb - the procedure is not trivial however.
geo-inspiron860
4 Posts
0
March 31st, 2008 21:00
zoe.evans
2 Posts
0
April 1st, 2008 07:00
Hi Please can you advise as in my last message im having problems with the lcd being faint, I have had a new lcd fitted and a mother board, yet i still have the same problem, Would this be the same problems as the person with the Inspirion?
Thanks