600M WITH D600 MOTHER BOARD

Question

I JUST REPLACE MY 600M MOTHER BOARD  THE MOTHER I GOT WAS A D600  I FLASH BIOS WITH 600MA05   AFTER RE-FLASH  THE COMPUTER TURN ON  BUT NOTHING SHOW ON SCREEN I CAN HEAR THE FAN RUNING  AND THE CDW MAKING NOISE WHAT CAN I DO TO FIX IT

ejn63 · Answer

Did the flash complete properly or did you have to power the system off before the prompt to do so appeared?

JOOPFINE · Answer

IT SAYED COMPLETED AND BIOS WILL START I EJECT THE CD OUT DRIVE  THAT THE ONLY  THING I DID THEN  SCREEN WENT BLANK

JOOPFINE · Answer

IT SAYED BIOS COMPLETED AND BIOS WILL START I EJECT THE CD OUT DRIVE  THAT THE ONLY  THING I DID THEN  SCREEN WENT BLANK

ejn63 · Answer

Remove the battery, unplug the system and hold the power button for 30 seconds.  Reseat (remove and replace) both memory modules.  See if the system will boot thereafter.

JOOPFINE · Answer

I TRY IT AND IT WORK , WORK FINE AFTER  THANK YOU THANK YOU  FOR ALL YOUR HELP  U R THE BEST

Locked Topics – Laptops General

Was this post helpful?