Thank you so much for your quick reply! Can you please tell me exactly how to get into the BIOS again, so afraid to mess anything else up... I am going to your Wiki right now and redoing it all over gain... Thank you so much
Check you didn't disable the onboard LAN or Modem in the BIOs. Also if you reinstalled ensure that you installed everything in the correct order. See my wiki A Clean Install of Windows for details on the install and driver order.
Maybe they aren't there as your on a laptop but I think they should be. Anyway what Studio eo you have and what drivers have you installed/attempted to install they are all R numbers.
Okay, so I am following your directions and everything is enabled except for summary screen and USB wake support... I do not see those which you listed anywhere?
I have successfully installed those you have listed in your instructions prior to "context"... All of those were installed... That context d400, External USB 56K Modem Rev:A00 will not install. and I get an error message that the MODEM is not available? I am tying to restart my system and the disc to be more accurate ....Just takes so much time...
just an update... i followed your wiki step by step and for some reason my computer finally is connecting to the internet.... i still cannot download the context driver however... do i need that driver or is it optional in your opinion? thank you!
Thanks for the instruction. I kept on pressing F8 and F10, but to no avail. Now I know that it should be F2 that needs to be pressed. I guess this is the button for all Dell laptops and desktops.
clositherapi
8 Posts
0
February 14th, 2012 12:00
Thank you so much for your quick reply! Can you please tell me exactly how to get into the BIOS again, so afraid to mess anything else up... I am going to your Wiki right now and redoing it all over gain... Thank you so much
Philip_Yip
9 Legend
•
16.1K Posts
0
February 14th, 2012 12:00
Check you didn't disable the onboard LAN or Modem in the BIOs. Also if you reinstalled ensure that you installed everything in the correct order. See my wiki A Clean Install of Windows for details on the install and driver order.
Philip_Yip
9 Legend
•
16.1K Posts
0
February 14th, 2012 13:00
Power down your computer, hold F2 while booting up.
Go to Advanced > System Configuration.
Next go to Advanced.
Do you have the same settings as me? In particular Onboard LAN Controller and Onboard LAN Boot ROM.
Note it may be slightly different for you as I'm on a Desktop.
Philip_Yip
9 Legend
•
16.1K Posts
0
February 14th, 2012 14:00
Maybe they aren't there as your on a laptop but I think they should be. Anyway what Studio eo you have and what drivers have you installed/attempted to install they are all R numbers.
clositherapi
8 Posts
0
February 14th, 2012 14:00
Okay, so I am following your directions and everything is enabled except for summary screen and USB wake support... I do not see those which you listed anywhere?
clositherapi
8 Posts
0
February 14th, 2012 17:00
I have successfully installed those you have listed in your instructions prior to "context"... All of those were installed... That context d400, External USB 56K Modem Rev:A00 will not install. and I get an error message that the MODEM is not available? I am tying to restart my system and the disc to be more accurate ....Just takes so much time...
clositherapi
8 Posts
0
February 14th, 2012 17:00
Error says : could not find modem device for this driver... by the way, thank you so much for all of your help.... :0)
clositherapi
8 Posts
0
February 14th, 2012 17:00
I am not sure what studio it is ... Wait, found it... Studio 1745... Yes, they are all "R" numbers... Every one of them... :0(
clositherapi
8 Posts
0
February 14th, 2012 18:00
just an update... i followed your wiki step by step and for some reason my computer finally is connecting to the internet.... i still cannot download the context driver however... do i need that driver or is it optional in your opinion? thank you!
firionicable
16 Posts
0
February 14th, 2012 19:00
Thanks for the instruction. I kept on pressing F8 and F10, but to no avail. Now I know that it should be F2 that needs to be pressed. I guess this is the button for all Dell laptops and desktops.
Philip_Yip
9 Legend
•
16.1K Posts
0
February 14th, 2012 23:00
Do you have any errors in the Device Manager?
Philip_Yip
9 Legend
•
16.1K Posts
0
February 14th, 2012 23:00
Also what model of studio do you have?