Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

43841

June 14th, 2013 07:00

XPS 700 motherboard

I know that the XPS 700 uses the old form factor and that the new motherboards do not work. I was looking at the mITX, http://www.ncix.ca/products/?sku=71117&vpn=P8H77-I&manufacture=ASUS, form factor. Do you think it would work in the system as an upgrade. (My old board is now fried and I hate to waste a good,, all be it heavy, case. The psu is still good all so. 

Would the miTX work in the case?

June 14th, 2013 08:00

Hi theoldworkhorse,

XPS 700 uses BTX form factor motherboards and would not be able to accommodate a mITX motherboard. You may consider purchasing a BTX form factor motherboards available online. You may refer to link Here.

As the BTX form factor motherboards have been discontinued, I did some research online and found an individual project in which a user was able to successfully convert BTX chassis to an ATX chassis and was able to use an ATX motherboard in it. You may refer to link Here

Note : Dell has not tested the above conversion and does not recommend changing the original system configuration.

For replacing the motherboard, you may refer to instructions in Service Manual Here.

Note :  Please refer to safety instructions in the manual prior replacing motherboard. 

Hope this helps.

6 Professor

 • 

8.8K Posts

June 14th, 2013 09:00

I know that the XPS 700 uses the old form factor and that the new motherboards do not work. I was looking at the mITX, http://www.ncix.ca/products/?sku=71117&vpn=P8H77-I&manufacture=ASUS, form factor. Do you think it would work in the system as an upgrade. (My old board is now fried and I hate to waste a good,, all be it heavy, case. The psu is still good all so. 

I'd suggest a replacement motherboard, and there are plenty available on eBay. Or, perhaps, your old board is repairable?

Would the miTX work in the case?

No, and bear in mind that the H77 is LGA1155, not LGA775. You'd need a new CPU and memory to go with the new motherboard, even if it did fit.
 
 

June 14th, 2013 19:00

Thank you for your in depth answer. Very much appreciated.

June 14th, 2013 19:00

Thank you for your answer.

June 18th, 2013 12:00

Hi theoldworkhorse,

I am glad you found the information helpful.

Do reach out to us if you need any further assistance. I would be happy to help you.

No Events found!

Top