Unsolved
This post is more than 5 years old
4 Posts
0
679
VLAN Routing - N2000 Series
Hi All,
We have been using the 5500 series L2 switches for all of our sites, but they are now end of life so I purchased the N2000 series L2+ switches which are a direct replacement.
On the 5500 I have three VLAN's on the switch, VLAN 1, 10 & 100. Only the native data VLAN has an IP interface on the switch for management, VLAN 10 & 100 have their interfaces on our firewall. VLAN1 is untagged and 10 and 100 tagged. With static routing, apart from the local route, I have a 0.0.0.0 /0 remote route to the firewall IP to send other VLAN traffic to the firewall. This works perfectly on the 5500 series switches.
Now to the issue, I have recreated the above on the N2000 along with the tagging and when i check the MAC address table I can see that the firewall MAC address is only being discovered on the native VLAN 1 and not in 10 and 100 when i should appear in all.
Any idea's?
Thanks in advance.