Browse Community
Help
Log In
Responses(1)
Solutions(0)
SlamX
950 Posts
0
January 23rd, 2009 09:00
You will need to load Hyper Terminal and on the command line type the Hayes command to turn the speaker on.
The command is ATM1 then press enter. This will enable you to hear the modem connecting then go silent after connected.
In hyperterm to view what you type use the command ATE1.
Dell Support Resources
View All
Top
SlamX
950 Posts
0
January 23rd, 2009 09:00
You will need to load Hyper Terminal and on the command line type the Hayes command to turn the speaker on.
The command is ATM1 then press enter. This will enable you to hear the modem connecting then go silent after connected.
In hyperterm to view what you type use the command ATE1.