This post is more than 5 years old
24 Posts
0
27374
installing esxi 6.5 from usb
i am struggling to get the dell customized esxi on a bootable usb key. i tried both 6.5 and the new 6.5u1. different boot modes bios and uefi. for transferring the iso to usb, i tried unix dd and mac etcher. etcher complains that the image is not bootable. so how do i set the mbr so my r430 will boot from the usb? all i get is "no boot device available ..." any advice would be appreciated.
wfx3
24 Posts
0
March 29th, 2018 20:00
found the solution here .. rufus creates the mbr correctly:
http://www.virten.net/2014/12/howto-create-a-bootable-esxi-installer-usb-flash-drive/
cy_mot
4 Posts
0
August 1st, 2018 12:00