This post is more than 5 years old
33 Posts
0
22182
VMAX - CLI command to view Storage Group Capacity
Hi All,
I'm looking for a cli command that will list the total capacity assigned to a storage group. So far the best I can do is see the number of devices in a storage group through cli.
Using smc, you can go to the properties and see the total capacity per storage group, but would like that same function in CLI.
Let me know if any of you has come across this.
Thanks!
mb_live
33 Posts
0
September 24th, 2014 15:00
I answered my own question 3 years later apparently. symcfg -sid list -tdev -detail -sg -gb Totals are at the bottom.
I'm thinking that's what I was wanting
yaribhas
134 Posts
1
February 25th, 2011 11:00
Yup my bad... You have to use IG to for it..
symaccess -sid 1543 list devinfo -ig
yaribhas
134 Posts
0
February 25th, 2011 11:00
symaccess -sid *** list -type storage -name -detail -v
I think you can not use -detail option in the previous command.
mb_live
33 Posts
0
February 25th, 2011 11:00
That command (at least for me) just lists the device count and I don't see where it lists the total capacity in the storage group.
yaribhas
134 Posts
1
February 25th, 2011 11:00
symaccess -sid **** show -type storage -detail
mb_live
33 Posts
0
February 25th, 2011 12:00
Right...that's what I was trying to avoid. I think it would be nice if it was possible to see storage group capacity before it's associated with the host, to verify the right size & disks are going to be presented.
Thanks for the reply!
SKT2
2 Intern
2 Intern
•
1.3K Posts
0
April 19th, 2011 12:00
why do you call it as "storage group" capacity if it is before getting associated with a host ?
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
April 19th, 2011 13:00
what's wrong with that ? You add devices to a storage group before or after you assign them to a masking view.
JonathanZhou
7 Posts
0
April 14th, 2016 19:00
good, that's what I am looking for.
perneesha
1 Message
0
March 19th, 2021 07:00
using this cli command we get single storage group details, how i get the total storage group details associated with luns, masking view with initiators using cli, plz let me know the procedure to do that
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
March 19th, 2021 15:00
Hello perneesha,
Here is a link to the CLI guide which list out all the commands that can be run. https://dell.to/3cO0Rzo