This post is more than 5 years old
2 Intern
•
227 Posts
0
631
AX4 ISCSI Configuration
Just want to quickly confirm when configuring an ax4 the iscsi interfaces should be:
EXAMPLE1:
SPA0 - SUBNET1
SPA1 - SUBNET1
SPB0 - SUBNET2
SPB1 - SUBNET2
or should it be
EXAMPLE2:
SPA0 - SUBNET1
SPB1 - SUBNET2
SPB0 - SUBNET1
SPB1 - SUBNET2
I'm configuring it to connect to vSphere 5.1, will be using software initiator.
kelleg
4.5K Posts
0
February 15th, 2013 08:00
Example 2 is the corrct format - see Support Solution emc245445 for a master list of all articles for iSCSI and specifically emc 156408 for Best Practices for iSCSI.
glen
duhaas1
2 Intern
2 Intern
•
227 Posts
0
February 15th, 2013 08:00
Thanks for the feedback Glen
kelleg
4.5K Posts
0
February 15th, 2013 09:00
You're Welcome - glad you asked up-front - it's easier to get the configuration setup correctly before putting into production
glen