Unsolved
This post is more than 5 years old
22 Posts
0
1283
HELP: Automatic authentication for deployment of Avamar Client has stopped working in 7.0 SP1 release
Our Avamar Client has stopped automatically activating during deployment of the client in our task sequence. This used to work before, but with the release of 7.0 it seems to have stopped? I noticed the client has an Administrator Server Port now. Does this field have a value now that needs to be put in the command line?
My current command line for installation is
msiexec /i "AvamarClient-windows-x86_64-7.0.101-61.msi" /qn SERVER=FQDN DOMAIN=/clients/Laptops
ionthegeek
2K Posts
0
April 29th, 2014 14:00
This is a known issue in the Avamar 7.0 and 7.0 SP1 installer packages that causes the installer flags to be ignored. The following hotfixes are available to address this issue:
The fix will also be included in the upcoming Avamar 7.0 SP2 release.
Edit: I reviewed the code change and as JHBPJF states below, the hotfixes mentioned above only correct an issue with the UICOMPONENT flag not being set properly. My apologies.
JHBPJF
22 Posts
0
April 29th, 2014 14:00
Thanks!
ionthegeek
2K Posts
0
April 29th, 2014 15:00
My pleasure!
JHBPJF
22 Posts
1
April 30th, 2014 14:00
I got the
from EMC but this does not fix the issue.
The hotfixes description only says it fixes this issue
I've reopened my case and hopefully will get the proper msi