This post is more than 5 years old
72 Posts
0
1160
Monthly Status
Hello ALL
We can see following output at the beginning of every month.
I found that celog_send_events.py send event every month as following. But I cannot find another behavior at that time.
# Monthly cluster status notification
0 0 1 * * root isi_ropc /usr/bin/isi_celog/celog_send_events.py -l info 400090001
Does anyone know the function of "Monthly Status"? any script run on Isilon cluster?
# isi events show -w -i 3.95
ID: 3.95
Type: 400090001
Severity: info
Value: 0.0
Message: Monthly status
Node: All
Lifetime: Mon Jun 1 00:00:00 2015 - Fri Jun 5 12:08:51 2015
Quieted: Fri Jun 5 12:08:51 2015
Specifiers: devid: 1
lnn: 1
val: 0.0
cadiletta
106 Posts
0
June 8th, 2015 09:00
Hello twakky,
The alert system has a long list of events triggered by a variety of conditions. You can review a list of events on our Event Reference guide on support.emc.com. Here's a direct link to the document: https://support.emc.com/docu56053_OneFS-7.2-Event-Reference.pdf?language=en_US
Within there, the Monthly Status alert is noted as follows:
Monthly status.
This alert is generated once each month to provide general cluster information.
The message is informational only.
Administrator response: No action is required.
You can cancel or quiet the alert by typing the following commands at the command line:
isi alerts cancel
isi alerts quiet
If you have any questions or need additional information, contact EMC Isilon Technical Support.