• Enter the PERC controller BIOS.
• Confirm that disks are visible as virtual disks.
• If only physical drives are present but no virtual disk xuper tv, the installer won’t see a usable volume.
• Create a simple virtual disk temporarily so the installer can detect storage.
• Check and update iDRAC, BIOS, and controller firmware via Dell support. Updated firmware improves hardware detection and can resolve install issues on older OS installers.
• You can update using iDRAC System Update or Lifecycle Controller > Firmware Update.

Hi, To fix this issue. you have to update your window. When the window is not updated so it shows such type of issues. First of all update the window then specify the installation file in a folder so that it can easily detect. It's not a big issue. Try to search the installation file through search bar in window.

If you are encountering installation problems with Openfiler on a Dell R630 Server, there are several potential reasons for the issue. Openfiler is a Linux-based storage management operating system, and compatibility with specific hardware, including servers, can sometimes be a factor. Here are some troubleshooting steps to help you address the problem

Thats Such an Help ful Thank you!!

If you are encountering installation problems with Openfiler on a Dell R630 Server, there are several potential reasons for the issue. Openfiler is a Linux-based storage management operating system, and compatibility with specific hardware, including servers, can sometimes be a factor. Here are some troubleshooting steps to help you address the problem

@jackmaaaa​ Where are the steps I can not see. Can you please mention them again I also need help.

Use a modern, supported OS (or storage distro).

• The H330 is supported out-of-the-box on current RHEL/CentOS-family kernels (via the SAS3 drivers) and also has Dell-supplied RHEL driver packages if you need them app. If you just need a NAS/SAN, use something current (e.g., TrueNAS, Rocky/Alma + targetcli/NFS, etc.).