Hi,

I have 62XX switch with latest firmware and I need to do following:

Port A - VLAN general mode, PVID is 100, Allowed Trunk is 101

Port B - VLAN general mode, PVID is 100, Allowed Trunk is 101

I want to do is:

1. allow all traffic from Port A to port  B that was untagged (VLAN 100)

2. Do not allow VLAN 101 traffic between these 2 ports. Allow them to send tagged tagged traffic for this VLAN only to particular "uplink" port. In other words, define it as "protected port", but only for this particular VLAN.