Unsolved
This post is more than 5 years old
13 Posts
0
1267
December 27th, 2016 08:00
Extract driver form Installshield
Hello to all,
after restoring image on Dell T5500 workstation I'm unable to start Windows. By analyzing the Stop error code, I have concluded that the issue with SATA drivers. Therefore I need to add drivers to my Universal Acronis restore procedure. The drivers I needed are packed here:
Problem is that this is a setup and there are no files with *,inf extension. These files are probably placed into one .cab file. However in order to repair my WIndows startup problem I have to add/ Load drivers offline (windows cannot start and I can use rescue CD to load drivers, but systems asks me for file type "Setup information") .
I have searched everywhere but cannot download files (*.sys, *,inf, *.oem)
What should I do?
Thank you
DELL-Jesse L
Moderator
•
17.9K Posts
•
69K Points
0
January 4th, 2017 11:00
Mickaleto,
Start the computer and tap the F2 Key to enter the bios. Once in the bios navigate to the Drives section and then to SATA Operation. You can the look on the right side and change the operation from AHCI to ATA. Save changes before exiting. You should then be able to complete the install using your image. Once you have Windows installed and the Intel Matrix Storage Driver loaded; change it back in the bios to AHCI.