Unsolved
This post is more than 5 years old
1 Message
0
4430
January 27th, 2009 11:00
problems conneting mi DELL 948 to pc by USB
Hi, i need some help with my printer dell 948, went i tray to connet it te only way that mi pc see it is for wirelles, but i don't want it, because i need configurate by mi USB port, but the pc don't find it bu USB, please helpme.
No Events found!
PudgyOne
11 Legend
•
30.3K Posts
•
106.6K Points
0
January 27th, 2009 14:00
Yuinor,
I have the instructions for installing the printer. To turn the wireless part off, read the article.
Disconnect your printer. Download and run this patch to completely remove the printer from your computer.
Restart your computer.
Download the proper drivers.
XP Drivers
Vista 32-bit Drivers
Vista 64-bit Drivers
All other drivers
Install the proper drivers. You'll be prompted when to connect your printer(powered on)
Please remember to install the latest firmware for the 948 Printer.
Scanning
Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.
Scanning wirelessly, use the scan buttons on the printer.
Also try reading
How Do I Connect a Dell™ Wireless Printer to a Wireless Network
Choose your printer. Beneath your printer, select your operating system. You'll be redirected to another page. Then click on show all steps. It will walk you through the installation process.
Rick