Error |
Troubleshooting |
010-317 Insert Fuser |
- Power Cycle the Printer.
- IF error still occurs, replace the fuser.
|
010-351 Replace Fuser |
- Power Cycle the Printer.
- Print a Parameter Setting Report page on the Dell™ 3110cn printer.
- To print a Parameter Setting Report, perform the following steps:
- Power off the printer.
- Close all printer covers and doors.
- Hold down the up and down buttons on the printer and power the printer on.
- Release your fingers from the keys when the message Diagnosing... appears.
Customer Mode and ESS Diag are displayed.
- Press the check button to select Customer Mode.
- Press the up or down button until Parameter appears and press the check button.
On the LCD, the Parameter menu appears.
- Press the up or down button until Print appears and press the check button.
The Parameter Setting Report prints.
- Press the Cancel button to stop the test.
- IF, the Life of Fuser (paper feeding count) has reached replacement time of 100,000 pages, replace the fuser.
- IF, the Life of Fuser (paper feeding count) has not reached replacement time of 100,000 pages, reseat the fuser.
- IF the error still occurs, replace the fuser.
|
010-354 Restart Printer |
|
010-377 Restart Printer 010-378 Restart Printer 010-379 Restart Printer 010-380 Restart Printer 010-381 Restart Printer 010-382 Restart Printer 010-383 Restart Printer 010-384 Restart Printer 010-385 Restart Printer 010-386 Restart Printer 010-387 Restart Printer 010-388 Restart Printer 010-389 Restart Printer 010-390 Restart Printer 010-391 Restart Printer 010-392 Restart Printer 010-393 Restart Printer 010-394 Restart Printer 010-395 Restart Printer
|
- Power Cycle the Printer.
|