Dell OptiPlex 7010 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : R6C92

Importance : Critical

Version : 1.20.0, 1.20.0 Latest version Recommended version Latest and Recommended version

Release Date : 12 Nov 2024

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: OptiPlex_7010_1.20.0_SEMB.exe

File size: 108.63 MB

To ensure the integrity of your download, please verify the checksum value.

SHA-256: 446fcb7137e89c79fce8b78444e1dc3777e338b2903579e15d4ff7115328a1e0

SHA-512: 8d765979e546d7a397c2238744df87a73c88f7a2531b92bc1304fba25d4ff8e335f562d94389b969181144799d9d28160c83874f6dbd04790d864c923b0c846d

Download .EXE

File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.

File Name: BIOS_IMG.rcv

File size: 108.62 MB

To ensure the integrity of your download, please verify the checksum value.

SHA-256: c2924b5666f62fb235ff2d4c2153825135ab13af7ae3625f7ff1c665ac152bb2

SHA-512: 3e69d69e0b65e4e6fe18fe791ec503680947b5bbac333825ef21f848483b032ee451b7dc9372f089ffaabba90dfa59b3fe315a499704a9e79fab9af412d1d8d9

Download .RCV

Important Information

- Do not power off the system until the process of updating the BIOS is completed.
- Once the BIOS is upgraded, you cannot downgrade the BIOS to earlier versions. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.

Compatible Systems

OptiPlex Micro 7010

OptiPlex Small Form Factor 7010

OptiPlex Tower 7010

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Applies to

Optiplex 7010 MFF system BIOS

Optiplex 7010 MT system BIOS

Optiplex 7010 SFF system BIOS