Dell OptiPlex 7010 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : XDF4D

Importance : Critical

Version : 1.11.0, 1.11.0 Latest version Recommended version Latest and Recommended version

Release Date : 17 Feb 2024

Download Type : System BIOS

Category : BIOS

This package contains the Dell System BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: OptiPlex_7010_1.11.0_SEMB.exe

File size: 107.43 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 0f147e01c400ac11661daceb57cc3458

SHA1: 19214298a82f7d89859713fb44106a50fe6f3e48

SHA-256: 90a9f388c594941d0bcb6a02ca5eb9f62d55367ff212bcb765dddb5af02df095

Download .EXE

File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.

File Name: BIOS_IMG.rcv

File size: 107.41 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: dad6b5a05af6dfaa42cf9a8920a1f93e

SHA1: 96d4708dec0eb601318da8c10a0ed09d1a0bfb16

SHA-256: 1bd9eaf96dd772cc59d6e7b58ac8bf8791ad295ac6c7d46340be3ca6329827a9

Download .RCV

Fixes & Enhancements

For Jan + Feb BKC:
- This release contains security updates as disclosed in the Dell Security Advisories DSA-2023-191, DSA-2023-467, DSA-2023-344, DSA-2023-362, DSA-2023-191. For more information, see Dell Security Advisories and Notices.
- Updated the Preboot Execution Environment (PXE) maximum boot time from 30 to 150 seconds for Dell OptiPlex systems with 13th generation Intel processors
- Fixed an issue where the Admin Unlock window in the BIOS setup stops responding or the system reboots automatically. This issue occurs when you enter the wrong Master Password in the system password prompt by pressing CTRL+Enter.

Compatible Systems

OptiPlex Micro 7010

OptiPlex Micro Plus 7010

OptiPlex Small Form Factor 7010

OptiPlex Small Form Factor Plus 7010

OptiPlex Tower 7010

OptiPlex Tower Plus 7010

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Applies to

Optiplex 7010 MFF system BIOS

Optiplex 7010 MT system BIOS

Optiplex 7010 SFF system BIOS