Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Latitude 7290/7390/7490 System BIOS
Újraindítás szükségesAUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
This package contains the Dell BIOS update. It is supported on Dell Latitude 7290, 7390, and 7490 systems that run the Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisories INTEL-SA-00213 and INTEL-SA-00233. The security advisory is an official statement when a product is impacted by a security vulnerability and a remedy is available.
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Fixes: - Fixed the issue where the boot mode setting is ineffective when it is changed from Boot Menu. - Firmware updates to address security advisory INTEL-SA-00213 (CVE-2019-0090, CVE-2019-0086, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094, CVE-2019-0096, CVE-2019-0097, CVE-2019-0098, CVE-2019-0153 and CVE-2019-0170). - Firmware updates to address security advisories INTEL-SA-00233(CVE-2018-12126, CVE-2018-12127, CVE-2018-12130 and CVE-2019-11091). - Removed the pre-boot Intel RST Manager Optimized Defaults option.
Enhancements: - Updated the Embedded Controller Engine firmware. - Updated Enhanced Pre-Boot System Assessment (ePSA) firmware.
Dell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation 1. Click Download File, to download the file. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file and double-click the file. 4. Click Yes to open the BIOS update utility. 5. Click Update to initiate the update process. A progress bar is displayed. 6. Click Restart to restart the system once the progress bar reaches 100%. The update process initiates at the Dell logo and an update initiation message is displayed with a progress bar. After BIOS update finishes, system will auto reboot to take effect.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.